CQB Ordinary Magnetic Pump

Magnetic drive centrifugal pump (magnetic pump for short) usually consists of an electric motor, a magnetic coupling, and a corrosion-resistant centrifugal pump. Its main feature is that it uses a magnetic coupling to transmit power without leakage. When the motor drives the outer magnet of the magnetic coupling to rotate, the magnetic lines pass through the gap and isolation sleeve and act on the inner magnet, causing the pump rotor to rotate synchronously with the motor. , transmits torque without mechanical contact. At the power input end of the pump shaft, since the liquid is enclosed in a stationary isolation sleeve, there is no dynamic seal and therefore no leakage. The flow-passing parts of the pump can be made of corrosion-resistant materials such as 304, 304L, 302, 321, 316, 316L, UB6, CD4MCu, titanium alloy, nickel-based alloy, etc. as needed. The CQB series magnetic pump is a new type of completely leak-free and corrosion-resistant pump developed by the National Joint Design team of magnetic pumps. Its technical and economic indicators are equivalent to the level of similar foreign products in the late 1980s. The type and basic parameters of the CQB series magnetic pump comply with the standard requirements of TB/T7742-95 "Small Magnetic Drive Centrifugal Pump".

Product usage

CQB series magnetic pumps are suitable for petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, film and television printing, water treatment, national defense, and other industries. They are suitable for transporting flammable, explosive, volatile, toxic, rare, and precious liquids and various corrosive liquids. Ideal equipment for liquids. It is suitable for transporting liquids that do not contain hard particles and fibers with a maximum system working pressure of 1.6MPa, a temperature not exceeding 100C, a density not greater than 1840kg/m³, and a viscosity not greater than 30cm2/S. If the system working pressure is greater than 1.6MPa, a special design can be carried out, and the maximum system working pressure can reach 15MPa.